mammoy2k
06-05 03:43 PM
You can read it 10 ways, but the CIS has only one interpretation(see bold below).
An un-adjudicated Form I-140 petition is not made valid merely through the act of filing the petition with USCIS or through the passage of 180 days. Rather, the petition must have been filed on behalf of an alien who was entitled to the employment-based classification at the time that the petition was filed, and therefore must be approved prior to a favorable determination of a �106(c) AC21 portability request.
I guess it is the same thing as earlier memo. They are saying that merely 180 days have passed since filing does not provide AC21 benefit. To determine AC21 benefit the petiton must be approved. So based on earlier memo, USCIS would see whther petiton can be approved. If yes then they will evaluate AC21. If not, then you got a problem.
An un-adjudicated Form I-140 petition is not made valid merely through the act of filing the petition with USCIS or through the passage of 180 days. Rather, the petition must have been filed on behalf of an alien who was entitled to the employment-based classification at the time that the petition was filed, and therefore must be approved prior to a favorable determination of a �106(c) AC21 portability request.
I guess it is the same thing as earlier memo. They are saying that merely 180 days have passed since filing does not provide AC21 benefit. To determine AC21 benefit the petiton must be approved. So based on earlier memo, USCIS would see whther petiton can be approved. If yes then they will evaluate AC21. If not, then you got a problem.
wallpaper system diagram labeled.
FinalGC
03-21 07:56 AM
I just sent an email. I am bumping this thread up
I am ready to coordinate from Lansing, Michigan.
I am ready to coordinate from Lansing, Michigan.
roseball
07-27 09:52 PM
http://murthyforum.atinfopop.com/4/OpenTopic?a=tpc&s=1024039761&f=7474050822&m=3411020351&r=4691050351#4691050351
Not sure if nasir is bluffing...But a July 9th filer getting a receipt b4 the rest (July 2nd - July 8th) --- Something fishy isnt it?
Here is the content from the post on murthyforum, doesn't make any sense to me. Checkout text in bold...:confused:
Application Received on : 07/03/2007
Agency : Nebraska
Status : Delivered on 07/09/2007 :confused:
Case: EB3-India Jan 2004
Returned/Rejected : Accepted, got Receipt # LIN xxx-xxx-xxxx.
Not sure if nasir is bluffing...But a July 9th filer getting a receipt b4 the rest (July 2nd - July 8th) --- Something fishy isnt it?
Here is the content from the post on murthyforum, doesn't make any sense to me. Checkout text in bold...:confused:
Application Received on : 07/03/2007
Agency : Nebraska
Status : Delivered on 07/09/2007 :confused:
Case: EB3-India Jan 2004
Returned/Rejected : Accepted, got Receipt # LIN xxx-xxx-xxxx.
2011 the digestive system diagram
kumar1
07-19 01:55 PM
Thanks to every person who answered this post. I managed to get an appointment in mumbai for Aug 2nd. This will give enough time to send necessary document from my end and also give enough breathing to file the application.
Very good, ask your wife to bring a load of sweets for IV member. ;)
Very good, ask your wife to bring a load of sweets for IV member. ;)
more...
gbarquero
08-31 09:44 PM
I've called several members and I am dispointed of them just saying "no.... I can't..."
But they all have time to be in the forums everyday asking for help, asking questions about dates, receipts, etc. It just doesn't make any sense that they have the chance to do something about it, they don't have "enough time for it"
But I am sure, they all complaint about how long is taking and all the money they have to invest on attorneys.
But they all have time to be in the forums everyday asking for help, asking questions about dates, receipts, etc. It just doesn't make any sense that they have the chance to do something about it, they don't have "enough time for it"
But I am sure, they all complaint about how long is taking and all the money they have to invest on attorneys.
rajuram
01-05 10:11 PM
In several responses people have compared MBA and PMP, I don't these two are comparable. Any thoughts?
more...
bigboy007
11-03 11:37 AM
all it matters is what individual members will vote if we have time we should go and meet our lawmakers who ever runs for president in 2012 will have this in his/her campaign.. but who ever becomes the president its the congress which does the voting and decides the fate of the bills.. only if we have more ppl meeting with each of lawmakers on regular basis we have some future either with CIR or w/o CIR via piecemeal
2010 human digestive system diagram
jasguild
07-17 09:12 AM
There is a petition to capture lost visa. If lost visas are recaptured, there will be some relief.
At least that would definetely help. Apparently over the past 5 years they have lost 180,000 visas just becuase.
jasquil
At least that would definetely help. Apparently over the past 5 years they have lost 180,000 visas just becuase.
jasquil
more...
whattodo
07-27 02:57 PM
This is paranoa!!!!!!!! STOP already
More than paranoia, I will call this stupidity. I dont understand what are people trying to do. People with misuse, clog the already clogged system and then complain later on.
More than paranoia, I will call this stupidity. I dont understand what are people trying to do. People with misuse, clog the already clogged system and then complain later on.
hair digestive system diagram
aroranuj
04-19 01:30 PM
Can anyone please comment if the advise given by my attorney is accurates (ability to file new I-140 with the MTR/Appeal for the older I-140?
Hello All,
Thanks for your thoughts & advise. It helped me in my conversation with my company's attorney. I would first like to clear my educational background. I have 10 + 2( HSC/ 12th Grade) + 1 (1st year of Bachelors of Commerce) + 3 year Diploma in my field. That being said this is what she has advised/recommended.
She states that she is fairly confident that we can argue successfully the denial. She has said that she will file an MTR/Appeal & at the same time file a new I-140 too. She says she thinks there is a 50% chance that the MTR would be successful, if not she said it will go for appeal & take about a year. The advantage she said of filing a new I-140 at the same time is that she can make an airtight case with the cover letter covering the points for the reason for the denial of this I140 & the decision on the new I-140 would be fairly quick if the appeal is denied as it was filed witht eh appeal for the old one. The only disadvantage with a new I-140 would be that we cant file for 485 till there is an open visa, which means no EAD/AP for myself & my wife.
Can members with knowledge of these kind of scenarios shed some of their thoughts?
Thanks.
Hello All,
Thanks for your thoughts & advise. It helped me in my conversation with my company's attorney. I would first like to clear my educational background. I have 10 + 2( HSC/ 12th Grade) + 1 (1st year of Bachelors of Commerce) + 3 year Diploma in my field. That being said this is what she has advised/recommended.
She states that she is fairly confident that we can argue successfully the denial. She has said that she will file an MTR/Appeal & at the same time file a new I-140 too. She says she thinks there is a 50% chance that the MTR would be successful, if not she said it will go for appeal & take about a year. The advantage she said of filing a new I-140 at the same time is that she can make an airtight case with the cover letter covering the points for the reason for the denial of this I140 & the decision on the new I-140 would be fairly quick if the appeal is denied as it was filed witht eh appeal for the old one. The only disadvantage with a new I-140 would be that we cant file for 485 till there is an open visa, which means no EAD/AP for myself & my wife.
Can members with knowledge of these kind of scenarios shed some of their thoughts?
Thanks.
more...
bigboy007
08-15 08:59 AM
Yes might be but Labor cert is not being part of list of docx that need to be attached even if ur 140 is pending as if you would have included I-140 receipt notice but in your case it seems better u do it rather feel sorry . But refiling in many normal cases wont help much unless if there is an issue in it.
I would not re-submit only for EVL, but it is important you review your entire AOS application set that went out to USCIS.
I reviewed the photocopies of our AOS applications and found a few omissions e.g. not including
1. EVL
2. pending I-140 receipt notice
3. Labor cert approval which would clearly show the priority date-- instead they put a wrong priority date in the covering letter.
I decided it is a higher risk to rely on such a messed up application!
Hence, I am working to re-submit our AOS. I asked that I review the entire application in advance this time around:) Thanks IV... I have come a long way because of YOU!
BTW a small issue I found on my family's AOS applications:
For my dependants... in Part (2) Application Type, I think we should check (b) my spouse or parent applied for....
it is currently (a) an immigrant petition giving me....
It was also (a) in their first set of AOS applications
Am I right in saying the checkbox to be selected is (b) not (a)?
Thanks!
I would not re-submit only for EVL, but it is important you review your entire AOS application set that went out to USCIS.
I reviewed the photocopies of our AOS applications and found a few omissions e.g. not including
1. EVL
2. pending I-140 receipt notice
3. Labor cert approval which would clearly show the priority date-- instead they put a wrong priority date in the covering letter.
I decided it is a higher risk to rely on such a messed up application!
Hence, I am working to re-submit our AOS. I asked that I review the entire application in advance this time around:) Thanks IV... I have come a long way because of YOU!
BTW a small issue I found on my family's AOS applications:
For my dependants... in Part (2) Application Type, I think we should check (b) my spouse or parent applied for....
it is currently (a) an immigrant petition giving me....
It was also (a) in their first set of AOS applications
Am I right in saying the checkbox to be selected is (b) not (a)?
Thanks!
hot pig digestive system diagram
maximus777
05-30 03:15 PM
Voted YES. Mine was the 220th vote!
more...
house human digestive system diagram
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
tattoo human digestive system diagram
bujjigadu123
02-22 03:43 PM
Hi
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
ICE do site visits to investigate employers. It happened to one of my former colleagues. What officer did was to verify that he was a genuine H1B employee. The officer visited his manager at client's place and verified his duties.
However I haven't heard an officer visiting one's home.
Hi,
Can you please provide me with the information about the questions your friend faced?. I would appreciate your response.
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
ICE do site visits to investigate employers. It happened to one of my former colleagues. What officer did was to verify that he was a genuine H1B employee. The officer visited his manager at client's place and verified his duties.
However I haven't heard an officer visiting one's home.
Hi,
Can you please provide me with the information about the questions your friend faced?. I would appreciate your response.
more...
pictures human digestive system diagram
gchopes
12-07 12:25 PM
Tried everything. Infopass, Congressman, Ombusdsman. Still over 100 days and no movement on AP. Anybody in the same boat? AP applied in TSC.
dresses human digestive system diagram
bujjigadu123
02-20 11:28 PM
Hi
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
Today I got a call from an officer in "immigration and customs enforcement" asking for an appointment to visit my residence for checing my immigration status.
I am on H1B visa.
I would appreciate if someone could give any sort of information related to calling for a home visit.
Thanks
more...
makeup human digestive system diagram
Suva
05-11 01:56 PM
I have the same question. Recapture bill can be added as an amendment. Is any of IV's provisions there in the bill?
Any idea if any of IV provisions (like recapture) being included in the bill?
Any idea if any of IV provisions (like recapture) being included in the bill?
girlfriend human digestive system diagram
downthedrain
02-18 04:41 PM
What was your RFE for?
I am still waiting to see what my RFE was for.
I had another LUD today as well (2/17) (also had one on 2/10, 2/13). wife only had 2/10 and 2/13.
-a
Employment letter with salary, did your status change?
I am still waiting to see what my RFE was for.
I had another LUD today as well (2/17) (also had one on 2/10, 2/13). wife only had 2/10 and 2/13.
-a
Employment letter with salary, did your status change?
hairstyles human digestive system diagram
Jimi_Hendrix
12-12 01:23 PM
Here's your answer in the bulletin
EMPLOYMENT: Demand for numbers in the Employment Third �Other Workers� category, as well as the China and India Employment Second preference categories, has been escalating. No movement in those cut-off dates will be possible until the current level of demand subsides.
Thanks for your post. It does look like EB2 India and EB3 Other Workers will remain where they are. The point to be noted is that EB3 India was not commented upon i.e. EB3 Other Workers is different from EB3 India or EB3 ROW. I don't want to commit the deadly sin of predicting but there is hope that EB3 India might move albeit slowly :p
EMPLOYMENT: Demand for numbers in the Employment Third �Other Workers� category, as well as the China and India Employment Second preference categories, has been escalating. No movement in those cut-off dates will be possible until the current level of demand subsides.
Thanks for your post. It does look like EB2 India and EB3 Other Workers will remain where they are. The point to be noted is that EB3 India was not commented upon i.e. EB3 Other Workers is different from EB3 India or EB3 ROW. I don't want to commit the deadly sin of predicting but there is hope that EB3 India might move albeit slowly :p
harrydr
11-26 12:03 AM
This is an outstanding job done to be presented to the CIS. Hopefully, IV members can convince CIS for immigration reform and make the quarterly spillover happen soon.
singhsa3
08-20 03:50 PM
Unfortunately, though it is highly unethical but not illegal
I would like to know How to file a complaint about labor fraud? I just found out that my employer didn't file 485 for me and instead he used the labor for someone else. Is there anyway I can file a complaint? I have no other option except to wait until the dates are current again. I paid all the expenses for labor, 140 and 485.
I would like to know How to file a complaint about labor fraud? I just found out that my employer didn't file 485 for me and instead he used the labor for someone else. Is there anyway I can file a complaint? I have no other option except to wait until the dates are current again. I paid all the expenses for labor, 140 and 485.
No comments:
Post a Comment